1953 MGTD

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

1953 MGTD

#1

Post by wayno » Sun Mar 29, 2015 5:02 pm

Well I drug the MGTD out today, originally I wanted to get this ready for the swap meet, but I don't think I am going to have the time to swap the engine/transmission out and get it running in time to take it there and put a ridiculous price on it, not sure what I am going to do with my space this year.
I looked in the tank and found it empty, not sure why that would be, but I am hoping it is a loose fitting rather than ethanol gas eating a hole in the tank, and I hit the brake pedal and found nothing in the way of brakes, but to do the engine swap I have to remove the whole interior anyway, so the master will be easy to get to.
So here it is fresh out of the shed where the cats were making it home.
Image
Image
Wish I had more time, I can likely work on it a couple hours each day, but I will not be holding my breath. :)
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
510freak
Global Moderator
Posts: 9706
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: Boo no 510 lol
Location: Van Isle
Has thanked: 6 times
Been thanked: 7 times
Contact:

Re: 1953 MGTD

#2

Post by 510freak » Sun Mar 29, 2015 6:10 pm

That is a cool little MG-TD Wayne!
Always liked them

I have a Model kit of of(part assembled) its a 1948 TC
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.

User avatar
K_trip
Posts: 771
Joined: Mon Oct 28, 2013 7:26 am
Cars: DATSUN
67 Bluebird R16/5spd
71 510 Goon L16/4spd
74 Li'l Hustler L16/4spd
Location: Santa Cruz Mountains, CAILF

Re: 1953 MGTD

#3

Post by K_trip » Mon Mar 30, 2015 10:40 am

My Dad sold his '53 TD a few years ago. Great cars - lots of character!

As you well know, working on an old Datsun (pre-Prince Motors merger) is similar to working on these :thumbs:

User avatar
DRIVEN
Posts: 7633
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1167 times
Been thanked: 1138 times

Re: 1953 MGTD

#4

Post by DRIVEN » Tue Mar 31, 2015 6:17 am

Another barn find at Waynos house. It's like an episode of Chasing Classic Cars.
When the only tool you have is a hammer every problem starts to look like a hippy.

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#5

Post by wayno » Fri Apr 03, 2015 9:10 pm

I took off the stock carb today, it didn't work good 2 years ago, so I was certain it wasn't going to work now, so I attempted to put a Weber on it, but the adapter I pulled off the 210 several years ago would not work, I tried real hard but gave up and just put a set of dual SUs on it, it will only take a couple days to get it running this way and have it movable, then when I figure everything out, I will likely install the MG engine.
Image
Image
Image
I know it seems like a waste of time putting the dual SUs on it, but it will be movable instead of me having to push it or use a come along to move it around, I like my vehicles to move under their own power if possible, and then if I have something else come up, the thing will move when I need to move it.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#6

Post by wayno » Fri Apr 03, 2015 9:23 pm

Another thing I remembered today was that the front engine mount for the MGTD engine, and the Datsun J13 block that was in it when I got it was a single mount just in back of the front crank pulley, while this engine has the more traditional mounts on the front sides.
I am thinking about making a plate that bolts on the existing mounts of the engine and have it mount like it originally did in the front center, and then make a bracket on one side that holds the engine upright with rubber isolaters, this is how the J13 block was mounted, and it was how they did it from the factory also.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#7

Post by wayno » Sat Apr 04, 2015 12:31 pm

Well it is running with the A block in it with dual SUs, it was a fight, but I won.
I would squirt a little gas in each carb and hit the starter and it would run for a second or two, but it would not pull fuel up out of the gas can, so I put an electric fuel pump on it, after I fixed all the leaking hoses I started trying to start it again with no luck, turned out the fuel line harness on the carbs was plugged, so after that was cleared, I tried again and was rewarded, it finally continued to run, now I had another issue, the carbs had been sitting so long they were sticky, so I fought that for a while until I think I have it, but I have to let the engine cool down, it has no cooling fan.
I adjusted the carbs for idle, I have not messed with the fuel mixture yet as I was just trying to get everything I did last night and today to work properly, I had to install the manifold/carbs, I had to pipe everything, I had to set up a throttle setup.
Here are the carbs without filters, if I want to have filters, I am going to have to remove that side panel, as the carb face is only an inch away from it.
Image
I backed out the car using the e-brake as a brake.
Image
Image
Image
Image
The interior that the cats had made home.
Image
After I eat lunch I will see if I can get the brakes to work again.
Yeah, it started, ran, and moved under its own power. :)
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
510freak
Global Moderator
Posts: 9706
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: Boo no 510 lol
Location: Van Isle
Has thanked: 6 times
Been thanked: 7 times
Contact:

Re: 1953 MGTD

#8

Post by 510freak » Sat Apr 04, 2015 4:51 pm

:fyea:
You won Wayne, Never a doubt :thumbs:

Sure looks solid !
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#9

Post by wayno » Sat Apr 04, 2015 6:26 pm

I put an electric fan in this afternoon, it has a thermostat so it turns on at about 180 degrees and off at 160 something.
Image
The brakes basically bled themselves, I filled the reservoir and watched bubbles come up for a while, then everytime I pushed on the pedal a little a few more bubbles came up, after a while no more bubbles and the brakes were solid, never had it work out like that before, but the pedal is solid, and the brakes do work, so I am not going to complain about how easy it was.
Here is where the brake master is, in the floor down by the brake pedal.
Image
I now need to figure out the fuel tank, I cannot drive around with a gas can on the running board, so maybe I will sort that out tomorrow.
I did remove the electric fuel pump today, once I cleared the lines, the stock pump seemed to work fine.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: 1953 MGTD

#10

Post by izzo » Sat Apr 04, 2015 9:34 pm

man that car is pretty damn cool haha. just when I thought you had no more, another pops out of nowhere.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#11

Post by wayno » Sat Apr 04, 2015 10:31 pm

izzo » Sat Apr 04, 2015 10:34 pm wrote:man that car is pretty damn cool haha. just when I thought you had no more, another pops out of nowhere.

I have had this one for close to 8 years now, it is very dirty at the moment, I have been worrying about getting it running, not what it looks like.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#12

Post by wayno » Sun Apr 05, 2015 1:10 pm

Well I blew air thru the fuel line going to the tank, then connected everything up and put 5 gallons of fuel in it, started it up and drove it around the neighborhood for 20 to 30 minutes, never got it above 35mph though.
The gas pedal is kinda hard to get to, so if I don't put the MG engine in it, I will need to bend the brake pedal over a couple inches to make room for my foot.
Oh, I also washed it a little.
Image
Image
Image
Image
Image
Image
Image
Image
So now I need to decide what I am going to do here with is car.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: 1953 MGTD

#13

Post by devilsbullet » Sun Apr 05, 2015 4:25 pm

Can you adopt me? Please?

User avatar
draker
Posts: 2539
Joined: Fri Jun 28, 2013 2:44 pm
Cars: 1969 Datsun 510 - 4 door
1971 Datsun 510 - 2 door
1992 Nissan 300ZX Twin Turbo
2002 Tacoma Double Cab 4x4
Location: Eugene, Or
Been thanked: 1 time

Re: 1953 MGTD

#14

Post by draker » Sun Apr 05, 2015 9:35 pm

Very cool car Wanyo! I'd love to see this in person some day. The lines are so beautiful!

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#15

Post by wayno » Sun Apr 05, 2015 9:52 pm

draker wrote:Very cool car Wanyo! I'd love to see this in person some day. The lines are so beautiful!
Thankyou, it's not as nice as it looks in the photos, it looks like it has been in a barn for years, which it has.
It's not really my thing, this type of car, I did have a plan, now I don't know what I am going to do, but it now runs and drives, so I can think about it for a while. :)
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: 1953 MGTD

#16

Post by izzo » Mon Apr 06, 2015 9:00 am

I dig the stockness of it, but dem wheels don't fit it in my opinion.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#17

Post by wayno » Mon Apr 06, 2015 3:50 pm

izzo » Mon Apr 06, 2015 10:00 am wrote:I dig the stockness of it, but dem wheels don't fit it in my opinion.

Them are stock wheels from the factory Tim, I bet you think it should have wire wheels, correct?
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

User avatar
draker
Posts: 2539
Joined: Fri Jun 28, 2013 2:44 pm
Cars: 1969 Datsun 510 - 4 door
1971 Datsun 510 - 2 door
1992 Nissan 300ZX Twin Turbo
2002 Tacoma Double Cab 4x4
Location: Eugene, Or
Been thanked: 1 time

Re: 1953 MGTD

#18

Post by draker » Mon Apr 06, 2015 5:33 pm

That's the feel I got from it after Tim mentioned it.

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: 1953 MGTD

#19

Post by izzo » Mon Apr 06, 2015 5:46 pm

wayno » Mon Apr 06, 2015 4:50 pm wrote:
izzo » Mon Apr 06, 2015 10:00 am wrote:I dig the stockness of it, but dem wheels don't fit it in my opinion.

Them are stock wheels from the factory Tim, I bet you think it should have wire wheels, correct?


Honestly, my thought is the wheels on it are stock. They just don't fit the vehicle. Like it would look better with something else, anything really. Something aftermarket. I've seen more with wire wheels or hubcaps or whatever VS these steely looking ones.

To a purist it's probably awesome and you will probably fetch more bank from it. Personally if I were to buy and have it/drive it I'd find some other wheels to rock on it. That's all i meant :lol:
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
wayno
Posts: 5210
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 403 times
Been thanked: 1244 times

Re: 1953 MGTD

#20

Post by wayno » Mon Apr 06, 2015 6:14 pm

I actually have a set of rusty wire wheels from a MGB for it, that would get me front disc brakes and a better gear ratio for the rear, but right now I am just happy it runs and drives.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein

Post Reply