Adams new 610 Coupe!!!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
But I did get to finagle a a few more "additions" to the list for body work
The battery tray will get shaved and relocated
and
The engine bay will get cleaned up as well. Holes filled and seems smoothed out
And as a cool little perk when I asked the painter if I left a digital camera for pics if he would takes some he informed me that it's standard procedure at his shop to photo document the restoration process so that he can show what was fixed and that it was fixed right not just filled bondo! Which was stoked to hear
The battery tray will get shaved and relocated
and
The engine bay will get cleaned up as well. Holes filled and seems smoothed out
And as a cool little perk when I asked the painter if I left a digital camera for pics if he would takes some he informed me that it's standard procedure at his shop to photo document the restoration process so that he can show what was fixed and that it was fixed right not just filled bondo! Which was stoked to hear
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
and last but not least im also having him modify the rear of the car just a tad..........
and last but not least im also having him modify the rear of the car just a tad..........
so this is what it looks like stock
and i picked these sexy beasts up along the way
and then i got these too, cus...................... well cus im an addict but admitting it is the first step right?
so this is what it looks like stock
and i picked these sexy beasts up along the way
and then i got these too, cus...................... well cus im an addict but admitting it is the first step right?
and last but not least im also having him modify the rear of the car just a tad..........
so this is what it looks like stock
and i picked these sexy beasts up along the way
and then i got these too, cus...................... well cus im an addict but admitting it is the first step right?
so this is what it looks like stock
and i picked these sexy beasts up along the way
and then i got these too, cus...................... well cus im an addict but admitting it is the first step right?
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
and one of those two sets are going in my car, i much prefer the earlier body style lights and now is the time not after paint so i asked the body guy what he would want to do that mod and it was stupid cheap so i went for it
they end up looking like this
or like this
depending on what year i go with.
they end up looking like this
or like this
depending on what year i go with.
Last edited by Eagle_Adam on Tue Apr 29, 2014 9:12 am, edited 1 time in total.
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
but either way i go, i wanna end up with sequential turn signals like in the old mustangs
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
and as for the front end?
well i have been working on something a little different for the front!
this is how the car came stock
and after i install all of the goodies i bought (including the real SSS grill)
it will look like this!!!
i even ended up with the AUS rear bumper too so i can really pull off the "AUS spec SSS 610 coupe" theme i was after
well i have been working on something a little different for the front!
this is how the car came stock
and after i install all of the goodies i bought (including the real SSS grill)
it will look like this!!!
i even ended up with the AUS rear bumper too so i can really pull off the "AUS spec SSS 610 coupe" theme i was after
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- izzo
- Site Admin
- Posts: 5651
- Joined: Wed Jun 26, 2013 6:32 pm
- Title: Save a pimp, Rent a bitch.
- Cars: Too many
- Location: Astoria, OR
- Contact:
Re: Adams new 610 Coupe!!!
What motor you going with again?
That thing would be pretty dope.. 5 speed, L18 with a set of round top SU's in the engine bay. omnomnom...
That thing would be pretty dope.. 5 speed, L18 with a set of round top SU's in the engine bay. omnomnom...
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
Close
The 610 will get the motor from the 710
After the 710 gets a KA swap
The 610 will get the motor from the 710
After the 710 gets a KA swap
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- izzo
- Site Admin
- Posts: 5651
- Joined: Wed Jun 26, 2013 6:32 pm
- Title: Save a pimp, Rent a bitch.
- Cars: Too many
- Location: Astoria, OR
- Contact:
Re: Adams new 610 Coupe!!!
Be super careful with that trim... Those seals are hard as fuck to find i hear, and new ones don't accept the trim or some shit?
Could be wrong, not a 610 guy. glad to see progress man
Could be wrong, not a 610 guy. glad to see progress man
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
Front and rear glass are glued in on a 610 coupe
And from here one any work I post on the 610 is being
Done by the paint and body guy
And from here one any work I post on the 610 is being
Done by the paint and body guy
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- DRIVEN
- Posts: 7654
- Joined: Thu Jun 27, 2013 7:05 pm
- Location: I've been everywhere
- Has thanked: 1187 times
- Been thanked: 1156 times
Re: Adams new 610 Coupe!!!
I wonder how many cars that engine has been in.Eagle_Adam wrote:The 610 will get the motor from the 710
When the only tool you have is a hammer every problem starts to look like a hippy.
-
- Posts: 418
- Joined: Thu Jun 27, 2013 4:57 pm
Re: Adams new 610 Coupe!!!
Finding the clips to hold that trim on may be a bit of a challenge. I found some years ago, but I forget where I got it from.. I'll try and look up the ordering slip.
- DRIVEN
- Posts: 7654
- Joined: Thu Jun 27, 2013 7:05 pm
- Location: I've been everywhere
- Has thanked: 1187 times
- Been thanked: 1156 times
Re: Adams new 610 Coupe!!!
Quality Paint used to have a pretty good selection of trim clips.
When the only tool you have is a hammer every problem starts to look like a hippy.
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
From what I understand the body buy has solutions for most trim clipsMicroMachinery wrote:Finding the clips to hold that trim on may be a bit of a challenge. I found some years ago, but I forget where I got it from.. I'll try and look up the ordering slip.
Guess we will see, but I'd take any info u have micro
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
-
- Posts: 418
- Joined: Thu Jun 27, 2013 4:57 pm
Re: Adams new 610 Coupe!!!
These are the ones. I was given an NOS OEM clip by Aaron Suchy. According to him, he got the last few that were available in the States through Nissan. I bought a set of these, and they are identical all except for the color is a little different. Irrelevant.
http://www.ebay.com/itm/10-X-DATSUN-620 ... f5&vxp=mtr
http://www.ebay.com/itm/10-X-DATSUN-620 ... f5&vxp=mtr
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
You sir are owed a drink!
Thank you
Thank you
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
- Eagle_Adam
- Posts: 1649
- Joined: Thu Jun 27, 2013 1:20 pm
- Location: Portland Or
Re: Adams new 610 Coupe!!!
pits, tits, tats, dats, and good times yo...... dont need nothing else in life
flatcat19 wrote:For the people; By the people; In the name of all that is Datsun!
-
- Posts: 418
- Joined: Thu Jun 27, 2013 4:57 pm