First some paint!
Then some clear:
I have yet to pull the masking.
If I really wanted to make this look nice, I would have sand blasted the centers. Eh. They are just Rikens.
Jacob's goon build
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
So today was about colors!
First some paint!
Then some clear:
I have yet to pull the masking.
If I really wanted to make this look nice, I would have sand blasted the centers. Eh. They are just Rikens.
First some paint!
Then some clear:
I have yet to pull the masking.
If I really wanted to make this look nice, I would have sand blasted the centers. Eh. They are just Rikens.
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
And then onto the coilover sleeves. Yea, the red just is not my thing. So went to Home Depot, grabbed the only drain opener that had a plastic bag on it with a money back guarantee, and I got to work.
Red sleeve:
Took a second, but then it started to react. Frothing at the mouth! AMP can didnt even get touched...
Onto the other side...
MMM shiny. I just sprayed it off with the hose. I made sure to spray with lots of water to dilute it alot.
These are a good idea:
This is what I used, and yes it really did heat up the aluminum. I was kinda surprised...:
And with the collars on:
So with that done, Im thinking I might try something for the camber plate tops that I have never seen anyone do, nor can I really find anyone on the internet doing it.
Red sleeve:
Took a second, but then it started to react. Frothing at the mouth! AMP can didnt even get touched...
Onto the other side...
MMM shiny. I just sprayed it off with the hose. I made sure to spray with lots of water to dilute it alot.
These are a good idea:
This is what I used, and yes it really did heat up the aluminum. I was kinda surprised...:
And with the collars on:
So with that done, Im thinking I might try something for the camber plate tops that I have never seen anyone do, nor can I really find anyone on the internet doing it.
-
RedBanner
- Posts: 2626
- Joined: Wed Jun 26, 2013 6:48 pm
- Title: MasterBlaster
- Location: vancouver , wa
- Has thanked: 2 times
- Been thanked: 2 times
- Contact:
Re: Jacobs goon build
If its run them above the perch, too late, done did it lol
Looked really good actualy
Looked really good actualy
wayno » Sat Jul 12, 2014 9:40 pm wrote: Everything is either tight or actually rubbing.
Taterhead » Tue Aug 05, 2014 2:29 pm wrote:Datsun gods will give you one working gauge, gasoline or speedometer; you can't have both.
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
What? If it runs them above the perch?RedBanner wrote:If its run them above the perch, too late, done did it lol
Looked really good actualy
-
RedBanner
- Posts: 2626
- Joined: Wed Jun 26, 2013 6:48 pm
- Title: MasterBlaster
- Location: vancouver , wa
- Has thanked: 2 times
- Been thanked: 2 times
- Contact:
Re: Jacobs goon build
Idk. Must be drunk.
wayno » Sat Jul 12, 2014 9:40 pm wrote: Everything is either tight or actually rubbing.
Taterhead » Tue Aug 05, 2014 2:29 pm wrote:Datsun gods will give you one working gauge, gasoline or speedometer; you can't have both.
-
DRIVEN
- Posts: 7699
- Joined: Thu Jun 27, 2013 7:05 pm
- Location: I've been everywhere
- Has thanked: 1210 times
- Been thanked: 1180 times
Re: Jacobs goon build
Your struts are done. I ran out of aluminum oxide in the middle of the job and ended up taking them to work to finish them in the cabinet. Anyway, I'll leave them just outside my garage door (the house, not the shop) so you can grab them if you want something to do on your day off.
When the only tool you have is a hammer every problem starts to look like a hippy.
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
YAY! That is something to do! More motivation to do things. Care has been in the air for awhile now.
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
MMk. Struts struts struts.
Picked them up from Driven's house. Instantly figured out where I wanted the rings. Welded those things on. Then I tackled the dust shield screws. 6/8 came out by finger. The other 2 I drilled a hole in the middle, hammered an allen key down, and twisted out. So they are all out now. Then I started painting. Same color as the wheels...
Also, needed the inserts from my other struts, but didnt have a spring compressor... So I cut the springs... Channel locks to remove the gland nut, boom inserts out.
Picked them up from Driven's house. Instantly figured out where I wanted the rings. Welded those things on. Then I tackled the dust shield screws. 6/8 came out by finger. The other 2 I drilled a hole in the middle, hammered an allen key down, and twisted out. So they are all out now. Then I started painting. Same color as the wheels...
Also, needed the inserts from my other struts, but didnt have a spring compressor... So I cut the springs... Channel locks to remove the gland nut, boom inserts out.
-
izzo
- Site Admin
- Posts: 5651
- Joined: Wed Jun 26, 2013 6:32 pm
- Title: Save a pimp, Rent a bitch.
- Cars: Too many
- Location: Astoria, OR
- Contact:
Re: Jacobs goon build
and then
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
and then more. And then I have to unload pics. and then Im continuing tomorrow. And then Ill post pics and more stuffs.
I did slide one of the sleeves on, and the insert in with gland nut. And then it hit me. I need a bigger spacer... damnit... maybe studs... double damnit...
I did slide one of the sleeves on, and the insert in with gland nut. And then it hit me. I need a bigger spacer... damnit... maybe studs... double damnit...
-
izzo
- Site Admin
- Posts: 5651
- Joined: Wed Jun 26, 2013 6:32 pm
- Title: Save a pimp, Rent a bitch.
- Cars: Too many
- Location: Astoria, OR
- Contact:
Re: Jacobs goon build
fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu.
waiting on pics
waiting on pics
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
-
RedBanner
- Posts: 2626
- Joined: Wed Jun 26, 2013 6:48 pm
- Title: MasterBlaster
- Location: vancouver , wa
- Has thanked: 2 times
- Been thanked: 2 times
- Contact:
Re: Jacobs goon build
Tire hits the sleeves? Where is the issue?
wayno » Sat Jul 12, 2014 9:40 pm wrote: Everything is either tight or actually rubbing.
Taterhead » Tue Aug 05, 2014 2:29 pm wrote:Datsun gods will give you one working gauge, gasoline or speedometer; you can't have both.
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
Im thinking so... I havent put the hubs on yet... But the tire was all but touching the bare strut tube before...
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
More work today... Got the struts in the car. Shields, and hubs on. I hate wheel bearing grease. Calipers on. Put the passenger wheel on... Sigh. Tire hits the sleeve. Wheel still turns ok, but its dragging. That is with a 5mm spacer. Looks like a bigger spacer and studs...
Same wheel paint on the struts...
Same wheel paint on the struts...
-
Laecaon
- Site Admin
- Posts: 4793
- Joined: Wed Jun 26, 2013 7:21 pm
- Cars: '71 510 Wagon, 02 BMW 325i Wagon
- Location: PDX, West side.
- Has thanked: 288 times
- Been thanked: 329 times
Re: Jacobs goon build
Mmk, sourced 9.5mm longer studs, between Baxters and Napa there is enough in stock today. And spacers...
-
izzo
- Site Admin
- Posts: 5651
- Joined: Wed Jun 26, 2013 6:32 pm
- Title: Save a pimp, Rent a bitch.
- Cars: Too many
- Location: Astoria, OR
- Contact:
Re: Jacobs goon build
oooh shiny, i like
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
-
510freak
- Global Moderator
- Posts: 9706
- Joined: Wed Jun 26, 2013 6:44 pm
- Title: DJ Jazzy Lou
- Cars: Boo no 510 lol
- Location: Van Isle
- Has thanked: 6 times
- Been thanked: 7 times
- Contact:
Re: Jacobs goon build
izzo wrote:oooh shiny, i like
Me too
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm
Sorry, I was channeling my inner flatcat.
-
510freak
- Global Moderator
- Posts: 9706
- Joined: Wed Jun 26, 2013 6:44 pm
- Title: DJ Jazzy Lou
- Cars: Boo no 510 lol
- Location: Van Isle
- Has thanked: 6 times
- Been thanked: 7 times
- Contact:
Re: Jacobs goon build
Looking good Jacob
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm
Sorry, I was channeling my inner flatcat.